Har alt du trenger for å lage musikk. Det har 32 tangenter som er gode å jobbe med og er et kompakt verktøy for å uttrykke seg. Kombinert med innovativ programvare, Smart Key funksjoner, og sømløs integrering, gir deg intuitiv kontroll på instrumenteringen, effektene, sløyfene og samplene, alt rett fra tangentbrettet.
Toontrack EZ Drummer 2 Inspirasjonen kan komme over deg når som helst og da gjelder det å fange ideene med en gang, uansett hvor du er. Komplete Kontrol M32 er klar for bruk hvor som helst. Enkelt å sette opp, enkelt å lagre, og det passer både arbeidsmetoden og livsstilen din. Hvis du vil lage låter hvor du en er, eller ha en kompakt studioløsning, så finner du dette i Komplete Kontrol M32. Lav vekt og klar for tur, hvor vil din musikk føre deg? |
EZ DRUMMER 2 RESURSER: |
INSTALLASJON AV KOMPLETE KONTROL
Skal du utnytte alle funksjonene til Komplete Kontrol M32 krever det at du kjører alle instrumentene gjennom Komplete Kontrol programmet. Det betyr at du må laste ned og installere Komplete Kontrol programvaren. Denne består av både en plugin og en selvstendig Mac applikasjon. I tillegg må alle virtuelle instrumenter i Logic legges til lydspor med Komplete Kontrol sin plugin. Alternativt kan Komplete Kontrol M32 kjøres i MIDI Modus. Du vil da måtte lære alle kontrollene hvilke MIDI signaler de skal sende ut for å styre parametrene du ønsker i Logic.
Gå inn på xxxx nettsiden til xxxx: www.native-instruments.com/setup-kontrol
Gå inn på xxxx nettsiden til xxxx: www.native-instruments.com/setup-kontrol
OPPSETT FOR LOGIC
Steg 1 - koble keyboard til Mac
- Sørg for at Start Logic Pro X applikasjonen ikke kjører.
- Koble Komplete Kontrol M32 keyboard til Mac med USB-kabelen.
- Sjekk at keyboard skjermen viser MIDI Mode.
Steg 2 - start Logic
- Start Logic Pro X applikasjonen.
- Når keyboard'et forespør å koble seg til Logic, klikk på Connect knappen.
- Sjekk at skjermen til keyboardet viser MS.
Steg 3 - følg veiviseren
Logic vil vise vinduet Control Surface Setup. Du kan se at den har identifisert KOMPLETE KONTROL-tangentene.
- Følgende veiviseren. Klikk OK for å koble tastaturet til Logic.
- Lukk Control Surface Setup vinduet.
Logic Pro er nå satt opp for KOMPLETE KONTROL. Vennligst les denne artikkelen hvis KOMPLETE KONTROL-tastaturet ikke automatisk gjenkjennes av Logic.
--------------------------------------------------------------------------------------------
Sette opp Apple Logic Pro X og GarageBand
Apple Logic Pro X og GarageBand konfigureres automatisk for avansert integrasjon med KOMPLETE KONTROL når du starter den respektive applikasjonen for første gang etter at du har installert KOMPLETE KONTROL-programvaren. Sørg for at tastaturet er tilkoblet og slått på før du starter programmet.
En dialogboks ber deg bekrefte dette etter at du har startet programmet:
Når meldingen OSC-appen "KOMPLETE KONTROL A-Series" ønsker å koble til Logic Pro X / GarageBand vises på skjermen, klikk OK.
Hvis du ikke har startet KOMPLETE KONTROL som frittstående applikasjon én gang før du bruker plugin-modulen i DAW for første gang, vil KOMPLETE KONTROL be deg om å skanne biblioteket ditt for installerte instrumenter og effekter. I dette tilfellet klikker du på Skann bibliotek-knappen for å skanne biblioteket ditt.
For a detailed overview of the available host integration features in Apple Logic Pro and GarageBand, refer to Integration with Apple Logic Pro X and GarageBand.
If you own Apple Logic Pro X or GarageBand, you can control many of their functions directly from the KOMPLETE KONTROL keyboard. The available functions mapped to the sections of the keyboard are listed below.
Your host needs to be set up for host integration before you can use this functionality. For more information, refer to Setting up Host Integration.
KOMPLETE KONTROL integrates with a number of hosts to facilitate a fluent workflow for performing and recording music with your KOMPLETE KONTROL Library.
Advanced integration of KOMPLETE KONTROL is available in the following hosts:
Apple Logic Pro X og GarageBand konfigureres automatisk for avansert integrasjon med KOMPLETE KONTROL når du starter den respektive applikasjonen for første gang etter at du har installert KOMPLETE KONTROL-programvaren. Sørg for at tastaturet er tilkoblet og slått på før du starter programmet.
En dialogboks ber deg bekrefte dette etter at du har startet programmet:
Når meldingen OSC-appen "KOMPLETE KONTROL A-Series" ønsker å koble til Logic Pro X / GarageBand vises på skjermen, klikk OK.
Hvis du ikke har startet KOMPLETE KONTROL som frittstående applikasjon én gang før du bruker plugin-modulen i DAW for første gang, vil KOMPLETE KONTROL be deg om å skanne biblioteket ditt for installerte instrumenter og effekter. I dette tilfellet klikker du på Skann bibliotek-knappen for å skanne biblioteket ditt.
For a detailed overview of the available host integration features in Apple Logic Pro and GarageBand, refer to Integration with Apple Logic Pro X and GarageBand.
If you own Apple Logic Pro X or GarageBand, you can control many of their functions directly from the KOMPLETE KONTROL keyboard. The available functions mapped to the sections of the keyboard are listed below.
Your host needs to be set up for host integration before you can use this functionality. For more information, refer to Setting up Host Integration.
KOMPLETE KONTROL integrates with a number of hosts to facilitate a fluent workflow for performing and recording music with your KOMPLETE KONTROL Library.
Advanced integration of KOMPLETE KONTROL is available in the following hosts:
SNARVEISARK FOR LOGIC
Her er en oversikt over funksjonene til Komplete Kontrol M32 i Logic Pro X.
Merk at de fleste innstillingene krever at du kjører Komplete Kontrol, enten som plugin eller selvstendig applikasjon. For å styre andre plugins i Logic må du kjøre keyboardet i MIDI modus og lære inn hvilke parameter knappene skal styre (se ender for veiledning).
Merk at de fleste innstillingene krever at du kjører Komplete Kontrol, enten som plugin eller selvstendig applikasjon. For å styre andre plugins i Logic må du kjøre keyboardet i MIDI modus og lære inn hvilke parameter knappene skal styre (se ender for veiledning).
MIDI MAPPING FOR LOGIC
Det er en utfordring med bruk av keyboardet sammen med Logic uten Komplete Kontrol:
Map Logic Pro X Smart Controls to Komplete Kontrol M32?
I can control Logic smart controls using my S Series II keyboard fine in midi mode - Logic smart controls automatically pickup Massive and Massive X macros and then I just use Learn to assign the knobs - I see no reason why the M32 should not work as well.
For the reference of others, I'll list the steps here:
And that's it. Every new track/instrument's Smart Controls, will be automatically mapped to these 8 knobs. Just make sure to hit that SHIFT + PLUG-IN buttons before you twist them knobs; the KK M32 likes to get out of MIDI Mode every time you add a new track.
------------------------
For every track you want to use Komplete Kontrol to browse patches, control plugins etc, you have to have the Komplete Kontrol plugin loaded, and load the plugin you want to control inside that. This is the way the keyboard "connects" with the plugins you want to control, and is how this works.
The MIDI Assignment editor enables you to create and customize MIDI templates for your keyboard. The MIDI Assignment editor is only configurable from the KOMPLETE KONTROL standalone application, and is not accessible from the plug-in version of KOMPLETE KONTROL. However, templates you create in the standalone application can be loaded in the plug-in version when you switch your keyboard to MIDI mode (SHIFT + MIDI).
Map Logic Pro X Smart Controls to Komplete Kontrol M32?
I can control Logic smart controls using my S Series II keyboard fine in midi mode - Logic smart controls automatically pickup Massive and Massive X macros and then I just use Learn to assign the knobs - I see no reason why the M32 should not work as well.
For the reference of others, I'll list the steps here:
- Make sure your instrument's controls are already mapped to Logic's Smart Controls. Many instruments have it by default, but if they are not, you can also design your own smart controls.
- Then you need to map Logic's Smart Controls to the knobs on your KK M32 (or any other MIDI keyboard/controller). In case of KK M32, you need to "Learn" all 8 knobs individually once; they are not mapped to Logic's Smart Controls by default. And it does not matter which instrument you use for mapping - you can do the learning with Retro Synth or Massive or whatever instrument that has Smart Controls enabled. Just be aware that in Logic Pro X you can have a maximum of 12 Smart Controls while KK M32 can take up to 32 controls - 8 knobs with 4 pages, which you can switch by hitting the left and right < > buttons while in MIDI Mode.
And that's it. Every new track/instrument's Smart Controls, will be automatically mapped to these 8 knobs. Just make sure to hit that SHIFT + PLUG-IN buttons before you twist them knobs; the KK M32 likes to get out of MIDI Mode every time you add a new track.
------------------------
For every track you want to use Komplete Kontrol to browse patches, control plugins etc, you have to have the Komplete Kontrol plugin loaded, and load the plugin you want to control inside that. This is the way the keyboard "connects" with the plugins you want to control, and is how this works.
The MIDI Assignment editor enables you to create and customize MIDI templates for your keyboard. The MIDI Assignment editor is only configurable from the KOMPLETE KONTROL standalone application, and is not accessible from the plug-in version of KOMPLETE KONTROL. However, templates you create in the standalone application can be loaded in the plug-in version when you switch your keyboard to MIDI mode (SHIFT + MIDI).